Neem contact op
HOBART NORGE
Gamle Drammensvei 120A
1363 HØVIK
(+47) 67 10 98 00
Veiviser
Kantoor & Service
Kontakt oss
HOBART
Premax Line
Profi Line
Ecomax By Hobart

PROFI UXT

  • VISIOTRONIC control: single-button control with remaining time indicator together with text and graphic display
  • SENSO-ACTIVE resource management: constantly measures the quality of the wash water and keeps the amount of rinsing needed in each rinse cycle to the minimum in order to guarantee a fully hygienic wash result
  • POWER wash: high-pressure washing to wash heavily soiled wash items
  • CLIP-IN wash and rinse arms: wash and rinse arms can be removed with one hand and without any tools
  • USB-interface: comfortable download of operational data in form of a protocol via USB
  • GENIUS-X² fine filter system: advanced filter system with prewash function reduces detergent consumption up to 35%
  • ROTOR-X wash system: separate rotating upper and lower 4-spoke wash arms deliver dynamic wash power
  • VAPOSTOP (optional): prevents vapour to escape from machine when door is opened
  • The optional drain heat recovery transfers heat from hot drain water to the fresh-water supply, saving up to 8.6 kW
  • The optional exhaust heat recovery uses steam to heat fresh feed water and reduces the amount of power needed, saving up to 5.2 kW
  • Loading height: above-average loading height of 860 mm
  • Intelligent energy management: the available energy is used continuously. Thus, at a low total loading value the heating time gets reduced
  • Interlocked strainer: prevents operation without tank strainer
  • EASY-CLEAN concept: blue markings in the machine help the operator to identify the components which require cleaning
  • Hygiene programme: for removal of calcium carbonate and other deposits from wash chamber
  • Front door utensil washer
  • Useable inside dimensions w x d x h: 1258 x 773 x 825 mm
  • Nominal capacity up to 30 cycles/h
  • 5 automatic cycles: short, standard, intensive, continuous, hygiene
  • Double walled housing
  • Multi-Setting: booster capacity may be reduced from 15.3 kW to 9.1 kW if connected with hot water
  • Strainer soil sensor
  • Refill signal (detergent / rinse aid)
  • Self-cleaning programme
  • Ready to install - completely equipped: fill / drain hose, electrical cable, detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer, tank heating, back panel
  • Tank, frame, wash / rinse arms and panels are stainless steal 1.4301

Tekniske data

*Thermostop guarantees required temperatures with cold water connection, the actual cycle times extend accordingly.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water softener or an external water softener of the product line HYDROLINE PROTECT.

Tilbehør

Informasjon om cookies

Vi bruker cookies For å vise innholdet på vår nettside best mulig. Mer informasjon om cookies samt alternativet om bruk av cookies finner du her: Integritetspolicy.

top